MISCO PRODUCTS CORP -- DOWN UNDER ACRYLIC FLOOR SEALER  -- 7930-00N042768
<pre>=====================  Product Identification  =====================

Product ID:DOWN UNDER ACRYLIC FLOOR SEALER
MSDS Date:01/01/1991
FSC:7930
NIIN:00N042768
=== Responsible Party ===
Company Name:MISCO PRODUCTS CORP
Address:R D 9 BOX 9155
City:READING
State:PA
ZIP:19605
Country:US
Info Phone Num:215-926-4106
Emergency Phone Num:215-926-4106
CAGE:0A3K2
=== Contractor Identification ===
Company Name:MISCO PRODUCTS CORP
Address:R D 9
Box:City:READING
State:PA
ZIP:19605
Country:US
Phone:215-926-4106
CAGE:0A3K2

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYETHYLENE WAX; (POLYETHYLENE WAX EMULSION)
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHANOL, 2-BUTOXY-, PHOSPHATE (3:1); (TRIBUTOXY ETHYL
    PHOSPHATE)
CAS:78-51-3
RTECS #:KJ9800000
Fraction by Wt: 0-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ETHANOL, 2-(2-METHOXYETHOXY)-; (DIETHYLENE GLYCOL
    MONOMETHYL ETHER)
CAS:111-77-3
RTECS #:KL6125000
Fraction by Wt: 0-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: TO 100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:ACRYLATE COPOLYMER DISPERSION
CAS:63744-68-3
Fraction by Wt: 35-40%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:RESIN; (RESIN SOLUTION)
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE LISTED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED OR REPEATED CONTACT
    MAY CAUSE DERMATITIS. EYE: IRRITANT. MAY CAUSE REDNESS OR SWELLING.
    INGESTION: MAY BE IRRITATING TO MOUTH, THROAT, AND GASTROINTESTINAL
    SYSTEM. VOMITING AND DIARRHE A EXPECTED WITH LARGE DOSES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE LISTED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: FLUSH WITH WATER. SEEK MEDICAL ATTENTION IF IRRITATION
    PERSISTS. EYES: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST
    15 MINUTES, HOLDING EYELIDS OPEN. SEEK MEDICAL ATTENTION.
    INHALATION: REM OVE FROM EXPOSURE. SUPPORT BREATHING (GIVE
    ARTIFICIAL RESPIRATION/OXYGEN) . INGESTION: DILUTE WITH 2 GLASSES
    OF WATER. SEEK MEDICAL ATTENTION IF SYMPTOMS PERSIST.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
    .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MOP UP OR OTHERWISE ABSORB AND HOLD FOR
    DISPOSAL.
Neutralizing Agent:NONE LISTED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINER CLOSED DURING STORAGE.
    FOR INSTITUTIONAL AND INDUSTRIAL USE ONLY. FOR USE BY TRAINED
    PERSONNEL ONLY.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE LOCAL EXHAUST TO KEEP TLV OF INGREDIENTS BELOW
    ACCEPTABLE LIMIT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:NONE LISTED BY MANUFACTURER.
Supplemental Safety and Health
PH: 8.5-9.0.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:20 @ 68F
Vapor Density:>1
Spec Gravity:1.03
pH:SUPDAT
Evaporation Rate &amp; Reference:<1 (WATER=1)
Solubility in Water:COMPLETE
Appearance and Odor:THIN MILKY LIQUID WITH CHARACTERISTIC ODOR.
Percent Volatiles by Volume:80+

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE LISTED BY MANUFACTURER.
Hazardous Decomposition Products:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
    LOCAL REGULATIONS .

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.