PIONEER/ECLIPSE CORP -- FIRST STEP SEALER, FS2502  -- 8030-00N033697
<pre>=====================  Product Identification  =====================

Product ID:FIRST STEP SEALER, FS2502
MSDS Date:01/01/1992
FSC:8030
NIIN:00N033697
=== Responsible Party ===
Company Name:PIONEER/ECLIPSE CORP
Address:HWY 18 N ECLIPSE RD
Box:909
City:SPARTA
State:NC
ZIP:28675
Country:US
Info Phone Num:919-372-8080
Emergency Phone Num:800-424-9300 (CHEMTREC)
Preparer's Name:WARREN W. WEAVER
CAGE:ONLMO
=== Contractor Identification ===
Company Name:PIONEER ECLIPSE CORPORATION
Address:CHEMICAL DIVISION
Box:City:SPARTA
State:NC
ZIP:28675
Country:US
Phone:919-372-8080
CAGE:0NLM0
Company Name:PIONEER/ECLIPSE CORP.
Address:ECLIPSE RD. & HWY. 21 S.
Box:1089
City:SPARTA
State:NC
ZIP:28675
Phone:(919) 372-8080
CAGE:ONLMO

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHANOL, 2-(2-METHOXYETHOXY)- LD50:(ORAL, RAT) 6.7 ML/KG
CAS:111-77-3
RTECS #:KL6125000
Fraction by Wt: 1-5%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE ING
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES:SLIGHTLY IRRIT. SKIN:IRRITATING
    UPON REPEATED OR PROLONGED CONTACT.  INHAL:VAPOR OR MIST CAN CAUSE
    HEADACHES, NAUSEA, AND IRRITATION OF THE EYES, NOSE, THROAT, AND
    LUNGS. INGEST:IRRITATION TO MOU TH, ESOPHAGUS, AND STOMACH.
    CHRONIC:PROLONGED OR REPEATED CONTACT CAN CAUSE DRYING, DEFATTING &
    DERM TO SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT:FLUSH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15
    MINUTES. SEE A PHYSICIAN IF IRRITATION PERSISTS. SKIN:WASH AFFECTED
    AREA WITH SOAP AND WATER. INHAL:MOVE SUBJECT TO FRESH AIR. SUPPORT
    BREA THING (GIVE O*2/ARTF RESPIRATION) . INGEST:IF INGESTED, INDUCE
    VOMITING. SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-COMBUSTIBLE
Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
    FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIALS CAN SPLATTER ABOVE 100C/212F.
    POLYMER FILM CAN BURN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILLS:ABSORB SPILL ON INERT MATL (E.G.,
    SAND, EARTH ) & DISP OF AS WASTE MATL IN ACCORD W/LOCAL, STATE, AND
    FEDERAL LAW. LG SPILLS:KEEP SPECTATORS AWAY. FLOORS MAY BE
    SLIPPERY;USE CARE TO AVOID	FALLING. DIKE & CONTAIN SPILL
    W/INERT(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORAGE TEMPERATURE (MAX 60C/140F)
    (MIN 1C/34F).
Other Precautions:KEEP FROM FREEZING, PRODUCT MAY COAGULATE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED WHEN PERMISSIBLE AIRBORNE
    CONCENTRATIONS ARE NOT EXCEEDED. IN EMERGENCY, USE NIOSH/MSHA
    APPROVED POSITIVE PRESSURE SCBA DEVICE.
Ventilation:MECHANICAL LOCAL EXHAUST VENTILATION AT POINT OF
    CONTAMINATION RELEASE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGGS/FULL LENGTH FSHLD.
Other Protective Equipment:AS REQUIRED BY EMPLOYER CODE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:8.8 +/- 0.25. % VOL WT:82 +/- 0.5%. SPILL PROC:MATL (E.G. SAND,
    EARTH). TRANSFER LIQ TO CONTAINERS FOR RECOVERY/DISP & SOLID DIKING
    MATL TO SEPARATE CNTNRS FOR DISP. KEEP SPILLS & CLEANING RUNOFF O
    UT OF SEWERS & OPEN BODIES OF WATER. WASTE DISP METH:ACCORDING TO
    LOCAL, STATE, AND FEDERAL REGULATIONS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32F, 0C
Vapor Density:<1
Spec Gravity:1.02 
pH:SUPDAT
Evaporation Rate &amp; Reference:<1 (WATER=1)
Solubility in Water:MISCIBLE
Appearance and Odor:OPAQUE WHITE EMULSION.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COAGULATE EMULSION BY STEPWISE ADDITION OF
    FERRIC CHLORIDE & LIME. REMOVE CLEAR SUPERNATANT LIQ & FLUSH TO
    CHEM SEWER/DRUM LIQUID WASTE & TURN IT OVER TO LICENSED HAZ WASTE
    DISP FACILITY FOR DISP, LAN DFILL/INCIN SOLIDS & CONTAM DIKING
    MATL(SUPP DATA

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.